Filter
Top Products
Bowflex Xtreme
®
2 SE Assembly Manual
9
Step 7 Install Slider Pulleys
Parts:
• 2 Slider Pulleys w/ Decal
• Main Assembly
Tools: 3/16 Hex Wrench
7-1
Install a Slider Pulley onto each Pulley
Arm as shown.
7-2 Choose any of the four holes to secure.
Slider Pulley w/
Cable Assembly
Slider Pulley w/
Cable Assembly
Flat Washer
Threaded
Stud
Nylock Nut
Nylock Nut
Flat Washer
Assembly Guide
Step 6 Install Pulley Arms
Parts:
• Right Pulley Arm
• Left Pulley Arm
• Main Assembly
Hardware:
• 4 Washers (3/8")
• 4 Button Head Screws (3/8" X 3/4")
• 2 Threaded Studs (1/2" X 9 1/2")
• 4 Nylock Nuts (1/2
")
• 4 Washers (1/2
")
Tools: 7/32" Hex Wrench, Rubber Mallet
6-1 Slide Left and Right Pulley Arms
onto the connectors on the base
frame as shown.
6-2 Secure Pulley Arms to Base Frame
using 3/8” screws and washers as
shown.
Finger tighten screws
at this time.
6-3
Align the two holes in the Pulley Arms with
those in the Lower Lat Tower Assembly and
secure using threaded studs, 1/2” washers and
nuts as shown.
Left Pulley Arm
Right Pulley Arm
Base Frame &
Lower Lat Tower
Assembly
Flat Washer
Button Head
Screw