A SERVICE OF

logo

6·12
EXHAUST
SYSTEM
EXCV REMOVAL
Disconnect the two cables from the EXCVA pulley. (Refer to
the EXCVA REMOVAL procedures.) (
CT"6-4)
Remove the muffler joint pipe
CD
together with the muffler
body
~
by removing the mounting bolts and loosen the con-
nector bolt.
Remove the EXCV cover
@ and disconnect the two cables
from the EXCV pulley.
EXCV INSPECTION
Turn the EXCV by hand and check that it moves smoothly.
If it does not move smoothly, replace the EXCV together with
the muffler joint pipe.
Decarbonize the EXCV if necessary.
I
CAUTION
I
* Do not attempt to disassemble the EXCV.
* The EXCV is available only as the muffler joint pipe
assembly.