1. Press the [Wi-Fi] key.
If [Disable] is specified for the [Wi-Fi Enable] setting, you cannot use the [Wi-Fi] key.
2. Press the [ ] or [ ] key to select a communication channel, and then press [Next].
Select a channel that corresponds to the device that you are going to connect with.
3. Press the [ ] or [ ] key to select the destination device name (IBSS), and then press
[Next].
If you cannot find the destination, check that the device is turned on.
When entering the device name, select [Input SSID], and then press [Next]. The SSID entry screen
appears. Enter the device name using the number keys, and then press [Next].
4. Press the [
] or [ ] key to select the authentication method, and then press [Next].
5. Press the [ ] or [ ] key to select the encryption method, and then press [Next].
6. Enter the encryption key and ID using the number keys, and then press [Connect].
The ID is used for identifying the encryption key. You can register four encryption keys (ID 1 to 4).
7. Press [Yes].
8. Check the connection using [Wi-Fi Status].
When "Connected" is displayed, the connection has been established.
When "Disconnected" is displayed, the connection has not been established. Start again from the
beginning.
Configuring Network Settings
33
