Message Causes Solutions
Memory Almost Full Memory has almost reached
capacity during sort copy.
If several originals are still to be scanned,
it is recommended to start printing now,
and copy the remaining originals
separately. If originals are being scanned
from the ADF, remove any remaining
pages from the ADF.
Memory Overflow The data is too large or
complex to print.
If using the PCL printer driver, set
[Resolution] in [Print Quality] to [600 ×
600 dpi].
Memory Overflow • The machine's memory
reached capacity while
scanning the first page of
the original to store a fax
job in memory before
transmission.
• The machine's memory
reached capacity while
storing a fax in memory in
Memory Transmission
mode.
Resend the fax in parts as several smaller
individual faxes, or send at a lower
resolution.
Memory Overflow
TX
Cancel
Memory has reached capacity
while scanning the second or
later pages of the original when
trying to send a fax in Memory
Transmission mode.
Press [TX] to send only the pages that have
been scanned in memory, or press
[Cancel] to cancel.
Misfeed: BypassTray Paper has been jammed in the
bypass tray.
Remove the jammed paper. See page 202
"Paper Feed Problems".
Misfeed: Stnd. Tray Paper has been jammed in the
paper exit area.
Remove the jammed paper. See page 202
"Paper Feed Problems".
Misfeed: Tray 1 Paper has been jammed in the
tray 1 paper input area.
Remove the jammed paper. See page 202
"Paper Feed Problems".
Net Communication
Error
Connection with the server was
lost while sending or receiving
data.
Contact the network administrator.
10. Troubleshooting
220
