CE-05171N page 22 of 44
66..22..55 GGaaggee DDiissppllaayy
This is an example of a custom gage display. Configured soft-
ware orders the data as needed. This display provides larger
characters for easier viewing as well as a means to prominently
display items of interest. Unacknowledged alarms will overwrite
the bottom half of the lower two gage boxes. The two bottom
lines are used to display the mode, hours, state and active
timer status.
66..22..66 LLiinnee BByy LLiinnee
This is an example of a line by line status screen for engine
parameters.
The MConfigPro software orders the available data as
needed.
Notice that there are no up/down arrows at the bottom of the
screen because there are no additional lines to be displayed
on this screen.
This is an example of a line by line status screen with more
parameters.
If the parameters do not fit on a single screen, up/down arrow
icons at the bottom of the screen can be used to scroll up or
down. The two bottom lines are used to display the mode,
hours, state and active timer status.
66..22..77 CCuussttoomm PPIIDD SSccrreeeenn
The user may choose to display any configured PID functions
in this convenient format. The control output will be displayed
as a percentage of the range. The bottom two lines are used
to display the mode, hours, state and active timer status.
TM
C
C
C
Operating Status Screen 2
COMP. OIL PRESS. 74 PSI
SUCTION PRESS. 35.3 PSI
DISCHARGE PRESS. 265 PSI
DISC. PRESS. TARGET 270 PSI
COMP OIL TEMP 105° F
DISC. TEMPERATURE 130° F
COOLER TEMPERATURE 105° F
AMBIENT TEMPERATURE 91° F
REMOTE ▼▲ 0000.3H
WARMUP B2 TIME-140
___________________________________
