System Configuration 73
E-EQ-MX5PCRG-F-ARC MX5 Reference Guide
Connections Tab
Tap the Windows icon | Help at any time for context-sensitive help.
AvantGo Connect
Access: the Windows icon | Settings | Connections tab | AvantGo Connect
Factory Default Settings
Server AvantGo.com (sync.avantgo.com:80)
Hostname Sync.avantgo.com
Port 80
Username Blank
Password Blank
Connection Options
Connect to this server Enabled
Refresh all content at next sync Enabled
Connect securely Disabled
Use this option to assign server settings and synchronize with all servers using AvantGo. Tap OK
to close this menu option. Any changes made are in effect immediately.
Beam
Access: the Windows icon | Settings | Connections tab | Beam
If the option to "Receive all incoming beams and select discoverable mode" is checked, the MX5
will automatically receive all incoming InfraRed transmissions. InfraRed Receive must be enabled
on the receiving device, if sending IR from the MX5 to another device. See the section titled
“Infrared Receive” for more information.
Network / Network Adapters
Access: Windows icon | Settings | Connections tab | Network Adapters.
Tap an adapter to view or change the properties.
Factory Default Settings
NE2000 Compatible Ethernet Driver
Use server-assigned IP address Default
Country code 1
Dialing Patterns
Local calls 9,G
Long distance 9,1FG
International 9,011,EFG
Tap OK to close this menu option. Any changes made are in effect immediately.
