9-11
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 9 Troubleshooting Commands
clrbecnt
clrbecnt
Clear Bit Error Count
The clrbecnt command lets you clear the APS-related bit error counters for a working line. To see the
contents of the error counters, use the dspbecnt command.
Cards on Which This Command Runs
AXSM
Syntax
clrbecnt <working-bay.line>
Syntax Description
Related Commands
addapsln, cnfapsln, delapsln, dspapsln, dspapslns, switchapsln, dspbecnt
Attributes
working-bay.line Identifies the bay (1 or 2) and the number of the line. The line number is from 1
to the highest numbered line on the back card. For the range of line numbers on
specific AXSM models, see Table 9-1.
Log: no log State: active Privilege: SUPER_GP
