7-38 Cisco BPX 8600 Series Reference
LMI and ILMI Parameters
Traffic Shaping Rates
Traffic shaping rates are listed in Table 7-8.
LMI and ILMI Parameters
The following is a listing of the LMI and ILMI parameters for the ASI and BXM:
For ILMI information, refer to Table 7-9.
For the LMI information, refer to Table 7-10.
Table 7-8 Traffic Shaping Rates
Service Type MCR PCR
CBR PCR PCR
VBR SCR * %Util PCR
UBR 0 PCR
ABR MCR * %Util PCR
Table 7-9 ILMI Parameters
Parameter Description
VPI.VCI VCCI for ILMI signaling channel equal 0.16
Polling Enabled Keep-alive polling
Trap Enabled VCC change of state traps
Polling Interval Time between GetRequest polls
Error Threshold Number of failed entries before ILMI link failure is
declared.
Event Threshold Number of successful polls before ILMI link failure
is cancelled.
Addr Reg Enab SVC Address Registration procedures enabled.
Table 7-10 LMI Parameters
Parameter Description
VPI.VCI VCCI for LMI signaling channel equal 0.31
Polling Enable Keep-alive polling
T393 Status Enquiry timeout value
T394 Update Status timeout value
T396 Status Enquiry polling timer
N394 Status Enquiry retry count
N395 Update Status retry count
