A SERVICE OF

logo

6-30 Cisco BPX 8600 Series Reference
Configuring Connections
Note The range of VPIs and VCIs reserved for PVC traffic and SVC traffic is configurable using
the cnfport command. While adding connections, the system checks the entered VPI/VPC against
the range reserved for SVC traffic. If there is a conflict, the addcon command fails with the message
“VPI/VCI on selected port is reserved at local/remote end”.
Field Value Description
local/remote_addr slot.port.vpi.vci card slot, port, and desired VCC or VPI connection
identifier
node slave end of connection
traffic_type type of traffic, chosen from CBR, VBR, ABR, and UBR
extended parameters parameters associated with each connection type