BXM T3/E3, 155, and 622 6-37
Command Line Interface Examples
An example of the cnfcon command for a VBR connection 3.1.105.55 follows.
pubsbpx1 TN YourID:1 BPX 15 9.1 Jan. 11 1998 02:41 GMT
Conn: 3.1.105.55 pubsbpx1 3.2.205.65 vbr
Description:
PCR(0+1) % Util CDVT(0+1) AAL5 FBTC SCR
50/50 100/100 250000/250000 n 50/50
MBS Policing
1000/1000 3
This Command: cnfcon 3.1.105.55
PCR(0+1) [50/50]:
An example of the addcon command for an ABR connection follows. In this case, the choice to
accept the default parameters was not accepted, and individual parameters were configured for a
connection using ABR standard VSVD flow control.
pubsbpx1 TN YourID BPX 15 9.1 Jan. 11 1998 01:10 GMT
From Remote Remote Route
3.1.104.54 NodeName Channel State Type Avoid COS O
3.1.104.54 pubsbpx1 3.2.204.64 Ok abr
3.2.201.61 pubsbpx1 3.1.101.51 Ok abr
3.2.201.62 pubsbpx1 3.1.101.52 Ok abr
3.2.203.63 pubsbpx1 3.1.103.53 Ok abr
3.2.204.64 pubsbpx1 3.1.104.54 Ok abr
5.1.30.120 pubsbpx1 5.2.60.240 Ok abr
5.1.31.121 pubsbpx1 5.2.61.241 Ok abr
5.1.32.122 pubsbpx1 5.2.62.242 Ok abr
5.1.33.123 pubsbpx1 5.2.63.242 Ok abr
5.2.60.240 pubsbpx1 5.1.30.120 Ok abr
5.2.61.241 pubsbpx1 5.1.31.121 Ok abr
5.2.62.242 pubsbpx1 5.1.32.122 Ok abr
5.2.63.242 pubsbpx1 5.1.33.123 Ok abr
This Command: addcon 3.1.104.54 pubsbpx1 3.2.204.64 abr 100/100 95/95 50/50 * e
d e d d 70/70 * 3 * 80/80 60/60 30/30 65/65 * 100 16 16 32 10 *
Add these connections (y/n)? y
