Page 16
SKU 93167
For technical questions, please call 1-800-444-3353
4. Push forward on the Main Boom handle to lower the Main Boom until the Bucket Assy.
reaches the ground.
5. Pull back on the Bucket handle control until the Bucket scoops up the dirt.
6. Pull back on both the Main Boom and Boom Extension control handles to raise the
load.
7. Press in, or pull out, the Boom Swing control handle to move the Bucket left or right.
Note: The Boom’s travel is 60 degrees left and 60 degrees right.
8. Press in on the Bucket control handle to dump the load.
Moving the Trencher
1. One method for moving the trencher around the work area is by using the Boom to push
the Trencher across the ground.
WARNING: This technique can be difficult to control and should only be attempted by
an experienced operator. The stability of the Trencher is totally dependent on the
stability of the ground that the trencher is working on; if you choose to move the
Trencher in this way, do so at your own risk.
2. Swing the Bucket inward so that the front of the bucket, not the scoop, is facing down-
ward. Press the Bucket down onto a solid piece of ground and press down hard enough
to raise the front legs off the ground.
3. Carefully operate the controls to move the boom and slowly roll yourself in the desired
direction. Be certain that the Tires and the new resting places for the Legs all re-
main on solid, stable ground.
4. After you have repositioned the Trencher, raise the Boom to place the Legs back into the
ground. The procedure can be repeated to move farther.
REV 05j; 07f
