User Command Specifications 9. Details of command
1 9. Details of command
9. Details of command
Descriptions of each command are provided starting from the next page.
The command descriptions have the format shown below.
* Alphabetic command nam
* This indicates the command format.
* This explains the required parameters for the command.
* This describes the command response.
* This includes the command function, conditions, and notes.
* This provides command usage examples.
*
Supported Command States
*
OFF ON PM
×
○
×
“○” when the power supply state is enabled while power management is in standby.
Input signal is required when “×”.
“○” when power supply state is ON.
“○” when power supply state is OFF.
Command
supported
The command is enabled
in control modes marked
by “○”.
※Command type
×××
○○○
Parameter types
Format
Example
D-Video
Response
Description
A-RGB2 Comp Video S-Video
Model Power
Function * This briefly describes the command function
Parameter
Mode
01.**** 11.**** 11.**** 11.****
Commands
Mode Control Setting Reference
D-RGB A-RGB1
Input
Remarks
SCART LocalNone Remote
SX50
The command is enabled in states marked by “○”.
○
×××
○
×
SX6 SX60 X600
This defines the environments that support the command (power supply state, input signal
state, control mode
.
Indicated here are the commands supported by each model (and user command version). "O": supported; "x":
not supported.
○○○○
PAGE 13
