User Command Specifications
9．Details of command RANGE DGAMMA
RANGE DGAMMA
RANGE DGAMMA
RANGE□DGAMM
r:DGAMMA=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE DGAMMA
< r:DGAMMA=I, 0, 1
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Command
supported
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The dynamic gamma setting value can be selected by the DGAMMA command.
X600
SX60
×○○○○ ○○○
SX6
○○○
– ○○×
SX50
○○○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power
Input Mode
Remote Local
○○○○
01.01**
Dynamic gamma setting option reques
Mode Control Setting ReferenceCommands
Function
Format
Example
Description
Response
ID
○○○–
This inquires about the parameter options which enable the dynamic gamma to be set.
01.00** 01.01** 01.01**
SX60 X600SX50 SX6
PAGE 143
