User Command Specifications 9. Details of command GET PJON
GET PJON
GET PJON
GET□PJON
?△PJON
:PJON=<Settin
：ＩＤ>
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The setting for the screen displayed at startup can be set by the PJON command.
> GET PJON or ? PJON
< g:PJON=SKIP
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Reference
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
User screen
ID
For all other responses, refer to "Error List."
Commands
Function
Format
Screen displayed at startup setting inquir
Mode Control Setting
Description
Response
This inquires about the current setting for the screen to be displayed at startup.
Canon log
SKIP No display
LOGO
Setting Meaning
CANON
SX50 SX6 SX60 X600
01.00** 01.01** 01.01** 01.01**
○○○○
Model Power
Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50
○○○○○○––○○×
SX6
○○○○○○○○○○×
X600
Command
supported
Example
SX60
PAGE 107
