PROGRAMMING CODES FOR CUSTOM FEATURES
Custom
Dial This
Suggested
Feature
Information
Button Label
Intercom Auto Dial
✱ 6 + lnter-
Person’s Name
com Code
Outside Auto Dial
✱ 90 + out-
Person’s Name or Telephone
side Number
Number
(16-digit max-
mum)
Primary Cover
✱ 4 + lnter-
Person’s Name or Location
com Code
Secondary Cover
✱ 5 + lnter-
Person’s Name or Location
com Code
Loudspeaker Paging
✱
680
Page All
Page Zone 1
✱
681
Page Zone 1
Page Zone 2
✱
682
Page Zone 2
Page Zone 3
✱
683
Page Zone 3
USING PAUSE, STOP, AND FLASH FOR OUTSIDE AUTO DIAL BUTTONS
An Outside Auto Dial button can store up to sixteen digits. For some types of calls,
though, you need to program an automatic pause, stop, or switchhook flash with the
number. For example, if your
MERLIN
system will be working in combination with
a PBX system where you have to dial 9 to get an outside line, you must program
a pause after the 9 on your MERLIN system Outside Auto Dial button. Or, when
you dial an additional long distance service sequence or call in a credit card authoriza-
tion code, you need to program an automatic stop.
Follow these steps to program a pause for PBX systems:
1. Label the button.
2. Set the voice terminal to program mode by following the boxed instructions on
page 30.
3. Touch the button you want for Outside Auto Dial.
4. Dial ✱ 90.
5. Dial 9.
6. Touch
Hold
(pause) to program the 1.5-second pause.
7. Dial the outside number you want the button to represent.
8. Slide the T/P switch to the center position to return to normal operation.
34
