At The Control Unit
Position switches to set the operating conditions for the entire system:
● Turn control unit on and off
●
Set the administrator/attendant console to Administer or Attendant
●
Set optional attendant voice terminals to Attendant or Normal
●
Set system to Toll Prefix or Area Code
●
Set system to Pooled or Square
●
Set system size to 1-8 Lines or > 8 Lines
●
Adjust Music-On-Hold volume
●
Adjust Loudspeaker Paging volume
●
Set system to record any changes made at the control unit
At The Administrator/Attendant Console
With the control unit switch for the administrator/attendant console set to Administer,
touch buttons on the administrator/attendant console to customize your lines to con-
form to the needs of your business:
● Add or remove the lines in a line pool
●
Assign and remove lines for individual voice terminals
●
Assign calling restrictions
●
Specify Touch-Tone or rotary signaling
●
Set up Night Service extra alerting
At Individual Voice Terminals
Use simple codes to program features for each voice terminal that serve the needs
of your business as a whole, as well as some features primarily for the convenience
of the person using that voice terminal:
●
Programmable Line Ringing (immediate, delayed, no ring)
●
Personalized Ringing
●
Intercom signal (ring only or ring and voice)
●
Automatic Line Selection
●
Speed Dialing codes
●
Button features:
- Cover
- Auto Answer on Intercom
- Auto Answer on Outside Lines
- Do Not Disturb
- Privacy
- Last Number Radial
- Saved Number Redial
- Touch-Tone Enable
- Intercom Auto Dial
- Outside Auto Dial
- Loudspeaker Paging
21
