Filter
Top Products
10
8. Attach the Left Upper Body Arm (105) to the Left
Upright (53) with two 1/4" x 3 1/2" Screws (103),
two 1/4" Flat Washers (101), and two M10 Star
Washers (9). Make sure that the Left Upper
Body Arm is on the side of the console assem-
bly shown.
Attach the Right Upper Body Arm (not shown)
in the same way.
101
8
53
105
103
9
9. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys
in a secure place. One of the hex keys is used to adjust the walking belt (see page 19). To protect the floor or
carpet, place a mat under the treadmill.
Console
Assembly
7. Attach the Latch Housing (48) to the Left Upright
(53) with two M4.2 x 18mm Screws (58); start
both Screws, and then tighten both of them.
58
48
53
7