Filter
Top Products
9
6. Attach the console back to the Console (80) with
the four M4.2 x 12mm Screws (3) that you re-
moved in step 4.
See step 1. Tighten the two M8 x 16mm Bolts
(1) on each side of the treadmill.
See step 2. Tighten the M6 x 10mm Bolt (2) on
each side of the treadmill.
6
80
Console Back
3
3
5. Set the Console (80) on the Console Plate (81),
and insert the excess wire into the Handrail
C
rossbar (83). Make sure that no wires are
pinched.
Attach the Console (80) with four M4.2 x 12mm
Screws (3); start all four Screws before tight-
ening any of them.
5
80
83
81
3
7. Tighten a M4.2 x 12mm Hood Screw (30) into
the Motor Hood (53).
7
53
30