Filter
Top Products
6. Place the Console Base (45) on the Right Handrail (5)
and the Left Handrail (not shown). Attach the Console
Base with four 3/4” Screws (77) (only two Screws are
shown). Do not tighten the Screws yet.
Insert the Wire Harness (53) through the two indicated
plastic ties on the Console Base (45). Next, insert the
Wire Harness up through the opening beside the Wire
Cover (50). Make sure that the Wire Cover is securely at-
tached to the Console Base.
See drawing 6a. Look at the top of the Console Base
(45). Insert the Wire Harness (53) through the plastic tie
on top of the Console Base.
Tighten the two Crossbar Screws (86) (only one is
shown).
6
8
45
50
Ties
86
5
53
Tie
45
77
53
6a
6
5
5
3
5
86
86
4
5
89
5. See the inset drawings and identify the two Crossbar
Screws (86); be careful not to confuse the Crossbar
S
crews with the 3/4” Screws (77). The Crossbar
Screws are slightly larger than the 3/4” Screws.
Hold the Crossbar (65) on the small brackets on the
Handrails (4, 5). Attach the Crossbar to the small brack-
ets with the two Crossbar Screws (86). Do not tighten
the Crossbar Screws yet.
Attach the end of the ground wire on the Wire Harness
(53) to the small hole in the left side of the Right Handrail
(5) with the Silver Ground Screw (89).
86
Small Bracket
S
mall Bracket
77
49
7
7. Press the Book Rack (49) onto the Console Base (45) in
the location shown.
45