Weslo WATL26806.0 Treadmill User Manual


 
18
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, adjust the incline to the
lowest position. If you do not do this, you may damage the
t
readmill when you fold it. Next, unplug the power cord.
CAUTION: You must be able to safely lift 20 kg (45 lbs.) to
raise, lower, or move the treadmill.
1. Hold the metal frame firmly in the location shown by the
arrow at the right. CAUTION: To decrease the possibility
of injury, do not lift the frame by the plastic foot rails.
Make sure to bend your legs and keep your back straight
as you raise the frame—do not lift with your back.
Raise
the frame about halfway to the vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, pull the latch knob to
the left and hold it. Raise the frame until the hole in the frame
is aligned with the latch pin, and then slowly release the latch
knob. Make sure that the latch pin is fully inserted into
the isolator.
To protect the floor or carpet from damage, place a mat
under the treadmill. Keep the treadmill out of direct sun-
light. Do not leave the treadmill in the storage position in
temperatures above 30° C (85° F).
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the storage
position as described above. Make sure that the latch pin is
fully inserted into the storage latch.
1.
Hold one handrail and place your other hand on the deck.
Place a foot against one of the wheels.
2.
Tilt the treadmill back until it rolls freely on the wheels.
Carefully move the treadmill to the desired location. To re-
duce the risk of injury, use extreme caution while mov
-
ing the treadmill.
Do not move the treadmill over an un
-
even surface.
3.
Place a foot against one of the wheels, and carefully lower
the treadmill until it is resting in the storage position.
Handrail
Deck
Wheel
Engaged
Latch Pin
Latch
Knob
Frame