Filter
Top Products
17
H
OW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the console’s
stereo speakers, you must connect your MP3 player or
CD player to the console. Plug one end of the included
3
.5mm to 3.5mm stereo audio wire into a jack on your
MP3 player or CD player. Plug the other end of the
cable into the input jack on the console.
Make sure
that both ends of the audio wire are fully plugged
in.
Next, press the Play button on your MP3 player or CD
player. Then, adjust the volume of your MP3 player or
CD player.
If you are using a portable CD player and the CD skips,
set the CD player on the floor or another flat surface in-
stead of on the console.
THE INFORMATION MODE
T
he console features an information mode that keeps
track of treadmill usage information and allows you to
s
elect a unit of measurement for the console.
To select the information mode, insert the key into the
console while holding down the Stop button. When the
information mode is selected, the following information
will be shown:
An “E” (for English miles) or
an “M” (for metric kilometers)
will appear in the lower right
display. Press the Speed in-
crease button to change the
unit of measurement, if de-
sired.
IMPORTANT: If a “d” appears in the lower right display,
the console is in the “demo” mode. This mode is in-
tended to be used only when a treadmill is displayed in
a store. While the console is in the demo mode, the
power cord can be plugged in, the key can be removed
from the console, and the displays will remain lit; the
buttons will not operate.
If a “d” appears when the in-
formation mode is selected, press the Speed de-
crease button so the “d” disappears.
The upper display will show
the total number of hours that
the treadmill has been used.
The lower left display will show the total number of kilo-
meters (or miles) that the walking belt has moved.
To exit the information mode, remove the key from the
console.