Filter
Top Products
9
7. Have a second person hold the console assem-
bly near the Right Upright (78).
Connect the wire harness on the console assem-
bly to the Upright Wire (74) as shown in the inset
drawing. The connectors should slide together
easily and snap into place. If they do not, turn
one connector and try again. IF YOU DO NOT
CONNECT THE CONNECTORS PROPERLY,
THE CONSOLE MAY BECOME DAMAGED
WHEN YOU TURN ON THE POWER.
Remove the wire tie from the Upright Wire (74).
Console Assembly
78
7
74
Wire
Tie
6. See the left inset drawing. Identify the outer
side of the remaining Frame Spacer (79).
Hold the Frame Spacer (79) between the Left
Upright (77) and the Lift Frame (65), with the
outer side of the Frame Spacer facing the
Left Upright. Attach the Left Upright to the
Lift Frame with a 3/8" x 2 1/2" Bolt (1), a 3/8"
Washer (10), and a 3/8" Nut (13); do not tighten
the Bolt yet.
6
77
1
1
79
79
10
13
13
65
10
65
Outer
Side
Inner
Side
79
77
74
Wire
Harness