Filter
Top Products
7
3. Attach a Wheel (84) to one side of the Base (85)
with a 3/8" x 2 1/4" Bolt (8), two Wheel Spacers
(83), and a 3/8" Nut (13) as shown. Do not over-
tighten the Bolt; the Wheel should turn freely.
Attach the other Wheel (84) in the same way.
85
84
13
83
83
8
84
3
2. Orient the Left Upright (77) as shown, and attach
it to the Base (85) with two 3/8" x 2 1/4" Bolts (8)
and two 3/8" Star Washers (9); do not tighten
the Bolts yet.
85
77
9
9
8
Latch
Holes
2
1. Have a second person hold the Base (85) in the
position shown.
Identify the Right Upright (78), which has a
square hole near the lower end.
Orient the Right Upright (78) as shown, and
attach it to the Base (85) with two 3/8" x 2 1/4"
Bolts (8) and two 3/8" Star Washers (9); do not
tighten the Bolts yet.
85
Square
Hole
8
8
9
9
78
1