Weslo 831.29502 Treadmill User Manual


 
16. The treadmill is capable of high speeds. 21. inspect and properly tighten aH parts of the
Adjust the speed in srnaH increments to treadmill regularly.
avoid sudden jumps in speed.
22. Never drop or insert any object into any
17. Never leave the treadmill unattended while it is opening.
running. Always remove the key and unplug r'_ _ mr"_ _ n,
the power cord when the treadmill is not in 23. tLJ_ J_,_ _M, Always unplug the power
gee. cord immediately after use, before cleaning
18. Do not attempt to raise, mower, or move the
treadmill until it is property assembled. (See
ASSEMBLY on page 5, and HOW TO MOVE
THE TREADMILL on page 11.) You rrnust be
able to safely lift 45 pounds (20 kg) to raise,
Jower, or move the treadmill
the treadmill, and before performing the
maintenance and adjustment procedures
described in this manual Never remove the
rrnotor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized ser-
vice representative only.
19. Do not change the incline of the treadmill by
placing objects under the treadmill. 24. This treadmill is intended for in=home use
20. When folding or moving the treadmill, make onJy. Do not use this treadmill in any corn-
sure that the storage latch is fully closed, rnercial, rentaJ, or institutional setting.
WARNING: Beforebeg nn,ngthisoronyexerc eeprogram,coneu tyourphysician.
This is especially important for persons over the age of 35 or persons with pre-existing health prob-
lems. Read aH instructions before using. Sears assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.
SAVE THESE iNSTRUCTiONS
The decaJs shown have been placed on your treadmill, if a decaJ is missing, or if it is not Jegible, please
call toll-free 1=866-69g-3756 to order a free replacement decal Apply the decaJ in the tocation shown.
Note: The decals are not shown at actual size.
°UnplugTreadmiml
/Disassembly,
3