Filter
Top Products
21
MISC
48. Remove the backing from the PRO 9730
decal and apply it to the home gym system
as shown.
49. Make sure that all parts have been properly tightened. The use of the remaining parts will be
explained in ADJUSTMENT, beginning on page 22 of this manual.
Before using the home gym system, pull each cable a few times to be sure that the cables move
smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem.
IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight
is used. See the CABLE DIAGRAMS on page 26 and 27 of this manual for proper cable routing.
If there is any slack in the cables, you will need to remove it by tightening the cables. See
TROUBLE-SHOOTING AND MAINTENANCE on page 25.
48
PRO 9730