Filter
Top Products
29. Wrap the Low Cable (86) around a 3 1/2”
Pulley (15). Attach the Pulley and a Cable
Trap (66) to the Press Frame (17) with a 3/8”
x 3 1/2” Bolt (16), a 3/8” Washer (9) and a
3/8” Nylon Locknut (21). Be sure that the
Cable Trap is turned to hold the Cable in
place and that the Cable is routed around
the Pulley as shown.
30. Wrap the Low Cable (86) around a “V”-Pulley
(6). Attach the “V”-Pulley to the indicated hole
in the Front Upright (42) with a 3/8” x 3 1/4”
Bolt (85), a 3/8” Washer (9), and a 3/8” Nylon
Locknut (21). Be sure that the Cable is in
the groove of the “V”-Pulley and that the
Cable is routed around the “V”-Pulley as
shown.
31. Wrap the Low Cable (86) around a 3 1/2”
Pulley (15). Attach the Pulley and a Cable
Trap (66) to the Press Frame (17) with a 3/8”
x 3 1/2” Bolt (16), a 3/8” Washer (9), and a
3/8” Nylon Locknut (21). Be sure that the
Cable Trap is turned to hold the Cable in
place and that the Cable is routed around
the Pulley as shown.
32. Wrap the Low Cable (86) around a 3 1/2”
Pulley (15). Attach the Pulley and a Cable
Trap (66) to the indicated hole in the Front
Upright (42) with a 3/8” x 3 3/4” Bolt (71), a
3/8” Washer (9), and a 3/8” Nylon Locknut
(21). Be sure that the Cable Trap is turned
to hold the Cable in place and that the
Cable is routed around the Pulley as
shown.
15
CABLE ASSEMBLY
29
30
86
15
16
66
21
17
86
6
42
21
9
85
9
31
32
86
15
66
16
21
17
42
66
15
21
9
9
71
86