Filter
Top Products
34. Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82) in the direction shown. Attach the Pulley and two
Pulley Covers (94) to the lower set of holes in the
Pulley Plates (31) with a 3/8Ó x 2 1/4Ó Bolt (99) and a
3/8Ó Nylon Locknut (42). Orient the wide tab on the
Pulley Covers as shown.
35. Route the Press Cable (88) around a 3 1/2Ó Pulley
(82) in the direction shown. Attach the Pulley and two
Pulley Covers (94) to the Leg Press Upright (4) with a
3/8Ó x 3 3/4Ó Bolt (76), two 3/8Ó Washers (38) and a
3/8Ó Nylon Jamnut (43). Orient the wide tab on the
Pulley Covers as shown.
36. Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82) in the direction shown. Attach the Pulley and two
Pulley Covers (94) to the indicated hole in the Press
Frame (12) with a 3/8Ó x 3 3/4Ó Bolt (76), two 3/8Ó
Washers (38) and a 3/8Ó Nylon Locknut (42). Orient
the wide tab on the Pulley Covers as shown.
37. Wrap the Press Cable (88) around a ÒVÓ Pulley (81).
Attach the ÒVÓ Pulley to the upper bracket on the Leg
Press Upright (4) with a 3/8Ó x 2Ó Bolt (50) and a 3/8Ó
Nylon Jam Nut (43).
15
35
36
37
34
31
94
88
99
94
82
42
94
94
82
76
38
88
12
82
38
42
94
88
81
4
50
43
38
43
88
4
38
76
Wide Tab
Wide Tab