Filter
Top Products
13. Attach the Leg Press Plate (11) to the Adjustment
Tube (10) with a 5/16Ó x 2 1/2Ó Bolt (39), two 5/16Ó
Washers (20) and a 5/16Ó Nylon Locknut (40). Make
sure the Leg Press Plate and Adjustment Tube are
oriented as shown.
Press a 1 3/4Ó Square Inner Cap (48) into the
Adjustment Tube (10).
14. Attach the Adjustment Tube (10) to the Leg Press
Arm (9) with the Lock Pin (73). Make sure the Leg
Press Plate (11) is oriented as shown.
Press two 2Ó Square Inner Caps (56) into the open
ends of the Leg Press Arm (9).
15. Locate and open the parts bag labeled ÒARM
ASSEMBLY.Ó
Attach the Leg Press Bumper (53) to the Front Seat
Frame (8) with the 1Ó Tap Screw (72).
Lubricate the 3/8Ó x 3 1/4Ó Bolt (71). Attach the Leg
Press Arm (9) to the Press Base (13) with the Bolt
and a 3/8Ó Nylon Locknut (42).
16. Press a 1Ó x 7/8Ó Plastic Bushing (54) onto each
welded spacer on the Press Frame (12). Slide the
Press Frame onto the Press Base (13) so that the
Plastic Bushings are aligned with the indicated tube.
Note: This will be a tight fit. Make sure that the
high hole is on the side shown.
Lubricate the 3/8Ó x 8Ó Bolt (52). Attach the Press
Frame (12) to the Press Base (13) with the Bolt and a
3/8Ó Nylon Locknut (42).
16
13
14
15
9
ARM ASSEMBLY
20
40
39
Angle
10
48
11
56
42
71ÑLubricate
53
72
13
54
42
12
13
11
9
9
8
10
73
52ÑLubricate
Tube
Welded
Spacers
High
Hole