Filter
Top Products
38. Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82) in the direction shown. Attach the Pulley and two
Pulley Covers (94) to the indicated hole in the Press
Frame (12) with a 3/8Ó x 3 3/4Ó Bolt (76), two 3/8Ó
Washers (38) and a 3/8Ó Nylon Locknut (42). Orient
the wide tab on the Pulley Covers as shown.
39. Wrap the Press Cable (88) around a ÒVÓ Pulley (81).
Attach the ÒVÓ Pulley to the lower bracket on the Leg
Press Upright (4) with a 3/8Ó x 2Ó Bolt (50) and a 3/8Ó
Nylon Jam Nut (43).
40. Wrap the Press Cable (88) around a 3 1/2Ó Pulley
(82) in the direction shown. Attach the Pulley and two
Pulley Covers (94) to the Leg Press Arm (9) with a
3/8Ó x 5Ó Bolt (74), a 3/8Ó Washer (38) and a 3/8Ó
Nylon Locknut (42). Only thread the Locknut a cou-
ple of turns onto the Bolt for now. It will be fully
tightened in step 42. Orient the wide tab on the
Pulley Covers as shown.
41. Wrap the Press Cable (88) around a ÒVÓ Pulley (81) in
the direction shown. Attach the ÒVÓ Pulley and a
Large Cable Trap (83) to the bracket on the Front
Seat Frame (8) with a 3/8Ó x 2 1/2Ó Bolt (65) and a
3/8Ó Nylon Locknut (42). Be sure that the Large
Cable Trap is turned to hold the Cable in place
and that the Cable and Pulley move smoothly.
16
41
38
39
40
83
65
81
88
42
8
76
38
82
94
38
42
88
12
Crossbar
42
88
9
94
74
38
82
88
81
4
50
43
Wide Tab
Wide Tab