Filter
Top Products
4. Slide the Front Seat Frame (8) onto the indicated
5/16Ó x 2 1/2Ó Carriage Bolts (49) in the Press Base
(13). Hand tighten two 5/16Ó Nylon Locknuts (40) onto
the Carriage Bolts.
Attach the other end of the Front Seat Frame (8) to
the Leg Press Upright (4) with two 5/16Ó x 2 3/4Ó Bolts
(55), two 5/16Ó Washers (20) and two 5/16Ó Nylon
Locknuts (40).
Press a 2Ó Square Inner Cap (56) into the Front Seat
Frame (8).
5. Place the Rear Seat Frame (16) onto the indicated
5/16Ó x 2 1/2Ó Carriage Bolts (49) in the Weight Base
(14). Hand tighten two 5/16Ó Nylon Locknuts (40) onto
the Carriage Bolts.
Attach the Rear Seat Frame (16) to the Ab Upright (1)
with two 5/16Ó x 2 3/4Ó Bolts (55), two 5/16Ó Washers
(20) and two 5/16Ó Nylon Locknuts (40).
6. Press a 1 1/2Ó Square Inner Cap (57) into each end
of the Leg Lever (15).
Attach a Leg Press Bumper (53) to the indicated hole
in the Rear Seat Frame (16) with a 1Ó Tap Screw
(72).
Lubricate a 5/16Ó x 2 1/4Ó Bolt (62). Attach the Leg
Lever (15) to the bracket on the Rear Seat Frame
(16) with the Bolt, two Leg Lever Spacers (30) and a
5/16Ó Nylon Locknut (40).
5
6
3. Press a 2Ó Square Inner Cap (56) into the open end
of the Top Frame (2). Press a 2Ó Square Inner Cap
(56) into each side of the Butterfly Frame (3). Press
two 1Ó Round Inner Caps (70) into the top of the
Butterfly Frame.
Attach the Butterfly Frame (3) to the Top Frame (2)
with a 5/16Ó x 3Ó Bolt (92). Make sure the Bolt is on
the side shown.
Finish attaching the Butterfly Frame (3) to the Top
Frame (2) with a 5/16Ó Nylon Jam Nut (91), a 5/16Ó x
2 3/4Ó Bolt (55), a 5/16Ó Washer (20) and a 5/16Ó
Nylon Locknut (40).
3
6
2
3
55
40
20
56
56
56
92
70
91
4
55
20
49
55
40
56
8
40
4
13
16
40
57
40
30
30
15
57 14
16
53
72
62
Lubricate
40
1
49
14
55
20
20
40