Filter
Top Products
20
43. Attach the Front Backrest (41) to the Front
Upright (42) with two M6 x 65mm Screws (43)
and two M6 Washers (10). The Backrest must
be oriented as shown.
44. Press a 38mm Square Inner Cap (32) into the
Front Seat Frame (36).
Insert an M6 x 50mm Carriage Bolt (38)
through the center hole in the Seat Plate (37).
Attach the Seat Plate to the Seat (13) with two
M6 x 16mm Screws (18).
Insert the M6 x 50mm Carriage Bolt (38)
through the indicated hole in the Front Seat
Frame (36). Tighten an M6 Nylon Locknut (2)
with an M6 Washer (10) onto the Carriage
Bolt.
Attach the other end of the Seat (13) to the
Front Seat Frame (36) with an M6 Washer
(10) and an M6 x 50mm Screw (81).
45. Press a 38mm Square Inner Cap (32) into the
Leg Lever (29).
Lubricate the M8 x 55mm Bolt (33). Attach the
Leg Lever (29) to the Front Seat Frame (36)
with the Bolt and an M8 Nylon Locknut (3).
Insert the M10 x 50mm Eyebolt (35) into the
Leg Lever (29) from the direction shown.
Tighten an M10 Washer (9) and an M10 Nylon
Locknut (21) onto the Eyebolt.
46. Rest the Front Seat Frame (36) on the indicat-
ed pin in the Front Upright (42). Attach the
Front Seat Frame to the Front Upright with an
M8 x 70mm Carriage Bolt (14) and the Seat
Knob (40).
SEAT ASSEMBLY
46
43
41
Thick
End
42
44
45
10
13
38
32
36
10
81
37
2
3
9
21
29
Lubricate
33
35
32
18
43
36
36
42
40
14
Pin