Filter
Top Products
7
7. Set two Weight Bumpers (83) over the indicated
holes in the Center Base (67). Insert the two
Weight Guides (20) into the holes. Attach the
Weight Guides to the Center Base with two 5/16”
x 2 3/4” Bolts (60), four 5/16” Washers (26), and
two 5/16” Nylon Locknuts (71).
26
26
26
26
73
71
6
5
59
59
71
5
71
71
83
83
26
26
26
60
26
67
20
7
6. Press a 2” Square Inner Cap (33) into the end of
the Left Seat Frame (29).
Orient the Left Seat Frame (29) with the Large
Hole facing the direction shown. Attach the Left
Seat Frame to the Left Leg (36) with two 5/16” x 2
1/2” Carriage Bolts (57) and two 5/16” Nylon
Locknuts (71).
Attach the Left Seat Frame (29) to the Left Upright
(7) with two 5/16” x 3 1/4” Bolts (59), two 5/16”
Washers (26), and two 5/16” Nylon Locknuts (71).
Do not tighten the 5/16” Nylon Locknuts (71)
yet.
33
26
26
36
71
71
59
29
Large
Hole
59
7
71
6
57
5. Orient the Right Seat Frame (5) so the indicated
holes are in the positions shown. Attach the Right
Seat Frame to the Right Leg (73) with two 5/16” x
3 1/4” Bolts (59), two 5/16” Washers (26), and
two 5/16” Nylon Locknuts (71).
Attach the Right Seat Frame (5) to the Right
Upright (6) with two 5/16” x 3 1/4” Bolts (59), two
5/16” Washers (26), and two 5/16” Nylon
Locknuts (71).
Do not tighten the 5/16” Nylon Locknuts (71)
yet.
Hole
Large
Hole