Filter
Top Products
14
22. Locate the Butterfly Cable (31). Lubricate an
M8 x 43mm Shoulder Bolt (107) with grease.
Attach the Cable to the Left Butterfly
Arm (57)
with the Bolt, an M10 Small Washer (95), and an
M8 Nylon Locknut (17).
24. Wrap the Butterfly Cable (31) under a Pulley (87).
Attach the Pulley to the Double “U”-bracket (81)
with an M10 x 45mm Bolt (33) and an M10 Nylon
Locknut (34).
26. Lubricate an M8 x 43mm Shoulder Bolt (107).
Attach the Butterfly Cable (31) to the Right
Butterfly Arm (56) with the Bolt, an M10 Small
Washer (95), and an M8 Nylon Locknut (17).
23. Wrap the Butterfly Cable (31) over a “V”-pulley
(86). Attach the “V”-pulley and a Large Cable
Trap (103) to the bracket on the Center Upright
(45) with an M10 x 60mm Bolt (105) and an M10
Nylon Locknut (34). Make sure the Cable Trap
is oriented to hold the Cable in the groove of
the Pulley.
25. Wrap the Butterfly Cable (31) over a “V”-pulley
(86). Attach the “V”-pulley and a Large Cable
Trap (103) to the other side of the bracket on the
Center Upright (45) with an M10 x 60mm Bolt
(105) and an M10 Nylon Locknut (34). Make sure
the Cable Trap is oriented to hold the Cable in
the groove of the Pulley.
22
107
Lubricate
17
95
31
57
23
86
105
31
103
34
45
25
26
86
105
31
103
34
45
24
87
31
81
33
107
17
95
31
56
34
Lubricate