Filter
Top Products
12
15. Press two Plastic Butterfly Bushings (79) and two
Metal Butterfly Bushings (93) into the Right
Butterfly
Arm (56). Wet the bottom of the Butterfly
Arm with soapy water and slide a Butterfly Foam
Pad (66) onto the
Arm.
Lubricate a 1/2" x 78mm Bolt (97) and the Plastic
Butterfly Bushings (79) with grease. Attach the
Right Butterfly Arm (56) to the Butterfly Bracket
(55) with the Bolt and a 1/2" Nylon Locknut (94).
Cover the Bolt and Locknut with two Butterfly
Caps (80). Do not overtighten the Locknut; the
Butterfly Arm must be able to pivot easily.
Repeat this step with the Left Butterfly Arm
(57).
16. Attach the Butterfly Backrest (101) to the Center
Upright (45) with two M6 Washers (78) and two
M6 x 75mm Screws (96).
15
79
Lubricate
Lubricate
80
97
94
80
55
56
93
93
57
79
66
16
101
78
96
78
96
45
17. Locate the Medium Cable (69). Route the Cable
up through the Weight Guide Top Frame (49) and
over a Pulley (87). Attach the Pulley inside the
Top Frame with an M10 x 75mm Bolt (92), two
M10 Washers (35), two 17mm Spacers (89), and
an M10 Nylon Locknut (34).
17
49
69
89
35
35
34
92
89
87