Filter
Top Products
7
8.
Attach the Leg Lever Bumper (55) to the Front
Leg (6) with a #8 x 3/4” T
ek Screw (62).
Press two 1 3/4” Square Inner Caps (42) into the
Leg Lever (7).
Lubricate a 3/8” x 2 3/4” Button Head Bolt (64)
with grease. Orient the Leg Lever (7) with the slot
on the side shown.
Attach the Leg Lever to the
Front Leg (6) with the Bolt and a 3/8” Nylon
Locknut (76).
Do not overtighten the Locknut;
the Leg Lever must be able to pivot easily
.
8
64
76
6
7
42
62
55
42
Lubricate
Slot
6. Have a second person hold the Lat Tower (4) so
that the holes in the back line up with the holes in
t
he Upright (3). Attach the Lat Tower to the
Upright with four 3/8” x 1” Button Head Bolts (87).
Attach the Name Plate (89) to the Lat Tower (4)
with two #8 x 1/2” Tek Screws (56).
6
4
3
89
56
56
87
87
7. Press a 1 1/2” Round Inner Cap (38) into each
end of the Top Frame (10).
Attach two Eyebolts (34) to the Top Frame (10)
with two 5/16” Washers (59) and two 5/16” Nylon
Jamnuts (65). Do not overtighten the Jamnuts;
the Eyebolts must be able to rotate freely.
Attach the Top Frame (10) to the Lat Tower (4)
with two 3/8” x 3” Button Head Bolts (70), two
3/8” Washers (75), and the Top Frame Cover
(93).
Make sure that the Eyebolts (34) are ori-
ented as shown in the inset drawing. If they
are not, turn the Top Frame around and reat-
tach it.
7
38
65
65
10
34
59
34
70
59
93
75
4
38
34
10
4
Side View