Filter
Top Products
9
14. Attach the Weight Top Frame (66) to the Press Top
Frame (9) with one 3/8” x 2 3/4” Bolt (46), a Support
Plate with 4” center holes (94), and a 3/8” Nylon
Locknut (50). Slide a 3 1/2” Pulley (24) with a Cable
Trap (25) onto a 3/8” x 4” Bolt (78). Insert the Bolt
through the Support Plate (94) and hand tighten a
3/8” Nylon Locknut (50) onto it.
Attach the Weight Top Frame (66) to the bracket on
the Press Upright (2) with two 3/8” x 2 3/4” Bolts (46),
a Support Plate with 2 1/2” center holes (34) and two
3/8” Nylon Locknuts (50). Do not tighten the Nylon
Locknuts yet.
14
12. Place two Weight Bumpers (51) over the indicated
holes in the Weight Base (5). Slide a Weight Guide
(15) into each of the holes.
Attach the indicated Weight Guide (15) to the Weight
Base (5) with a 3/8” x 2 3/4” Bolt (46), two 3/8” Flat
Washers (48), and a 3/8” Nylon Locknut (50).
Slide ten Weights (21) onto the Weight Guides (15).
Make sure the Weights are turned so the pin
grooves point towards the floor.
Press a Weight Tube Bumper (18) into the lower end
of the Long Weight Tube (70). Slide the Weight Tube
into the center holes in the Weights (21).
Slide a Top Weight (16) onto the Weight Guides (15).
Note: Make sure the Top Weight is turned so the
groove fits over the welded pin on the Weight
Tube (70).
50
21
46
48
48
5
51
51
70
66
46
78
24
25
50
9
50
34
94
2
13. Place the Weight Top Frame (66) on the indicated
brackets on the Uprights (1 and 2). Note: The four
Weight Guides (15) must be behind the Weight
Top Frame, as shown in step 14.
Attach the Weight Top Frame (66) to the Butterfly Top
Frame (33) with two 3/8” x 2 3/4” Bolts (46), a
Support Plate with 4” center holes (94), and two 3/8”
Nylon Locknuts (50). Do not tighten the Nylon
Locknuts yet.
Attach the Weight Top Frame (66) to the bracket on
the Butterfly Upright (1) with two 3/8” x 2 3/4” Bolts
(46), a Support Plate with 2 1/2” center holes (34),
and two 3/8” Nylon Locknuts (50). Do not tighten the
Nylon Locknuts yet.
13
46
34
46
94
33
1
16
15
18
46
50
66
50
15
Groove
Pin
Brackets
Pin
Grooves
12