Filter
Top Products
18
8
STEP
• Attach arm pad to arm pad support
(AC2) using four bolts (M10x25).
• Attach the seat post (AT1) to the seat
bracket by sliding four bolts (M10x45)
and four flat washers (10.2x22x2)
through the bracket. Fasten four more flat
washers (10.2x22x2) and four nylon nuts
(M10) on the bottom.
• Take the seat post assembly (AT1) and
attach the seat bottom using four bolts
(M10x50) and four flat washers
(10.2x22x2). Attach seat back to the sup-
port using two bolts (M10x25).
Disengage the pull pin and slide the
completed assembly into the main seat
support (AC3). Secure by tightening the
pull pin.
LIGHT BLUE BAG
AC2
AC2
AT1
AT1
AT2
AT2
AC3
AC3