Filter
Top Products
10
E3000
R2000
SETTING MPH & KPH
The console will be set for your specific product and also for MPH. There
are 2 small switches inside the console next to the wire harness plugs.
One is for changing from MPH to KM. The other is for setting the
console to a bike or an elliptical (EP).
To change a setting, follow the direction below:
First, remove the console from the console mast by unscrewing the 4
console screws. Unplug the cable(s), making sure they do not fall back
down the console mast. To change from MPH to KM, simply slide the first
switch down, as shown on the diagram on the inside of the console. The
switch to the right controls the bike or elliptical (EP) mode. The bike is the
down position, while the elliptical mode is the up position.