Filter
Top Products
SETTING THE DATE AND TIME (CHRONO TYPE II)
A. Pull out crown to position (2). Turn the crown away from you and the
quick-set feature will rapid-advance the hour hand. As the hour hand
passes midnight it will also advance the calendar. Continue to turn
the crown away from you until the date showing is the day before the
desired setting.
B. Pull out the crown to position (3). The seconds subdial hand will stop.
Turn the crown away from you. When midnight is reached, the date
will advance to the desired date. Continue to turn the crown until the
desired time is set. Remember, the date advances at 12:00 midnight,
not 12:00 noon.
C. After setting, push in the crown then press and screw down away
from you until it is sealed tightly into position (1). The date and time
are now set.
To Set Time Alone
Release the crown and then follow instructions “B”.
NOTE: You must always push in and screw down the crown to form a
water resistant seal with the case. Never operate the crown when the
watch is wet.
- 8 -