Filter
Top Products
SETTING THE DATE AND TIME
A. Pull out the crown to position (2).
B. Turn the crown away from you until the date showing is the
day before the desired setting.
C. Pull out the crown to the fully extended position (3) and rotate
toward you. When midnight is reached, the date will advance to
the desired date. Continue to turn the crown until the desired
time is set. Remember that the date advances at 12:00 midnight,
not 12:00 noon.
D. Push in the crown, returning it to the normal position (1).
The date and time are now set.
To Set Time Alone
Refer to instruction “C.”
NOTE: You must always push in and screw down the crown to
form a water resistant seal with the case. Never operate the crown
when the watch is wet. Mechanical watch crowns are located at
the 3 o’clock position.
- 39 -