Filter
Top Products
- 41 -
SETTING THE TIME
A. Wind the movement if necessary.
B. Pull out the crown into position (3). The seconds hand will stop.
C. Make sure that the position of the hands corresponds to a change
of date at midnight and not at noon.
D. Turn the crown to pre-position the hands on the desired time.
E. Push the crown back down firmly against the case in position (1),
the watch will begin to run again instantly.
NOTE: For precise time setting, it is advisable to pass the desired
minute, then turn the crown counterclockwise to position the minute
hand on the relevant mark.