Filter
Top Products
TIMEX
®
IRONMAN
®
Classic 50 Move+ Owner’s Manual Page 12
6. If multiple lines of data are available, use the Start/Split and Stop/Reset buttons to view
all of the data.
7. Push the Set/Recall button to exit and view additional saved data or workouts.
NOTES:
• Daily activity and interval workout data will be automatically overwritten; however Chrono
workout data cannot be overwritten. For this reason, the TIMEX Connected app has an
optional feature that erases Chrono workout files from the watch once the Chrono
workout has been transferred to the app. Please see the TIMEX Connected app section
of this owner’s manual for details.
• Calorie expenditure data is not an exact number, but a general estimation. Calorie
values less than 100kcals will be displayed as whole numbers (decimals truncated, not
rounded).
SYSTEM SETUP
1. From the Time of Day screen, push the Mode button until you see Setup on the screen.
2. If necessary, push the Start/Split button until you see System Setup on the screen.
3. Push the Set/Recall button to access the System Setup menu.
4. Use the Start/Split button to make your Unit selection: Imperial (in, ft, mi, lbs) and Metric
(cm, m, km, kg). Then push the Mode button to proceed.
5. If necessary, use the Start/Split and/or the Stop/Reset buttons to adjust the calibration
factor (see the Calibration section of the manual for more details). Then push the Mode
button to proceed.
6. Use the Start/Split button to make your Sensitivity selection:
• Mid: Default setting, the most versatile setting for all general purpose usage
• Low: Recommended for low intensity walking or mild jogging
• High: Recommended for users with a unique gait motion (use only if other
settings do not provide favorable results)
7. Then push the Mode button to proceed.
8. Use the Start/Split button to make your Sensor selection: On (watch will track steps,
distance and calories burned) or Off. Then push the Mode button to proceed.
9. Use the Start/Split button to make your Chime selection: On (watch will chime every
hour) or Off. Then push the Mode button to proceed.
10. Use the Start/Split button to make your Beep selection: On (watch will beep with every
button press) or Off. Then push the Mode button to proceed.
11. Use the Start/Split button to make your Sync selection: Show (watch will be visible to
compatible BLE sensors) or Hide. Then push the Mode button to proceed.
12. Use the Start/Split button to make your NFC selection: On (allows the watch to
communicate with NFC antennas) or Off.
13. Once all selections have been made, push the Set/Recall button to exit and save
settings.
14. Push the Mode button to return to the Time of Day screen or push the Start/Split button
to proceed to the next Setup menu option.