Filter
Top Products
Timex Data Link USB Watch User Guide
If AUTO is active, pull out the Crown to set the start and stop times. Turn the Crown to change
the ON time, then press MODE to go to the OFF time. Press the Crown in to save the setting.
When you select AUTO or change the ON or OFF time, the change takes effect when the ON
or OFF time is next reached.
Chime
When this feature is activated, the watch chimes at every hour. It can be set to OFF, ON, or
AUTO. When set to AUTO, the chime is active only during preset times.
Setting the Chime
From the display showing the current state of Chime mode, press either START/SPLIT or
STOP/RESET. The sequence of settings is OFF–AUTO–ON–AUTO–OFF. This allows you to
set the current state as either ON or OFF and also turn on AUTO, if desired. When chime mode
is ON, its icon appears in the display, as shown
If AUTO is active, pull out the Crown to set the start and stop times. Turn the Crown to change
the ON time, then press MODE to go to the OFF time. Press the Crown in to save the setting.
When you select AUTO or change the ON or OFF time, the change takes effect when the ON
or OFF time is next reached.
The chime sounds at both the ON and OFF times and at each hour between. If the ON and OFF
times are the same, the watch chimes only once.
Button Beep
When this feature is activated, the watch beeps whenever any button is pressed. It can be set to
OFF or ON.
Setting Button Beep
From the display showing the current state of Button Beep mode, press either START/SPLIT or
STOP/RESET to change the setting.
23