Timex M434 Watch User Manual


 
9
CONFIGURING SETTINGS
Thesettingschangesdescribedinthissectionarenotrequired,butyoucanusethesesettingstogetthemost
out of the watch.
SETTING UP AUTOMATIC LAPS
Youcansetthewatchtotakeasplitautomaticallyduringworkouts.AutomaticlapsworkinbothRunand
Chronomodeswhenthetimerisrunning.Youchooseoneofthepresetdistances,andthewatchtakesasplit
foryousoyoudon’thavetobreakstrideortakeyoureyesofftheroad.
1. PressMODEuntilSETdisplays.
2. Press+or-toselectAUTOLAP,thenpressOK.
3. Press+or-toselectthedistanceatwhichthewatchwilltakeasplit,thenpressOK.
Youonlyselectthenumberofunitsatwhichyouwanttotakeasplit.Thewatchappliestheunitsof
measurement you selected when you set up the watch in the Getting Started section.
Forexample,ifyouchoseMIwhenyousetupthewatch,andchose1instep2ofthisprocedure,the
watchtakesaspliteverymileyoutravel.
4. Press+or-tosetALERTtoON(thewatchwillbeepwhenasplitistaken)orOFF(thewatchwillnotbeep),
thenpressOK.
5. PressMODEtoexit.
SETTING THE TIME MANUALLY
WhileitiseasiesttoallowtheGPStosetthetimeforyoubasedonselectedtimezones,youcanseteither
timezonemanually.
1. PressMODEuntilSETdisplays.
2. Press-or+toselectTIME,thenpressOK.
3. Press+or-toselectthetimezone(TIME1orTIME2)toset,thenpressOK.
4. Press+or-toselectMANUAL,thenpressOK.
5. Press+or-tochangehours,thenpressOKtomovetothenexteld.
6. Repeatstep5forminutes,seconds,year,month,day,timeformat,anddateformat.
7. PressMODEtoexit.
SeleCting the time diSplay
Youcansettwotimezonesonthewatchtokeeptimeindifferenttimezones.Bydefault,TIME1isthepri-
marytimezonethatdisplaysinTimemode,butyoucanviewTIME2ormakeittheprimarytimezone.
• InTimemode,pressVIEWtoseethetimeinyoursecondarytimezone.
• InTimemode,holdVIEWtomakethesecondarytimezoneprimary.
TURNING ON NIGHT-MODE
®
FEATURE
Normally,youmustpressINDIGLO
®
buttontoturnonthenight-light.WhentheNightMode
®
feature is active,
anybuttonpressbetweenthehoursof6p.m.and7a.m.intheprimarytimezoneturnsonthenight-light.
1. PressMODEuntilSETdisplays.
2. Press+or-toselectNIGHT,thenpressOK.
3. Press+or-toselectON,thenpressOK.
4. PressMODEtoexit.
ADJUSTING CONTRAST
Contrastsettingsdeterminehowdarkthetextonthewatchscreenappears.Raisethecontrastsettingfor
darkertext,andlowerthesettingforlightertext.
1. PressMODEuntilSETdisplays.
2. Press+or-toselectCONTRAST,thenpressOK.
3. Press+or-toselectthecontrastvalue,thepressOK.
4. PressMODEtoexit.