Filter
Top Products
BEFORE
YOU BEGIN
ASSEMBLY
9
INTRODUCTION
IMPORTANT
PRECAUTIONS
BIKE
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
A S S E M B LY S T E P 3
BOLTS (A)
SPRING WASHER (B)
WASHER (C)
920B ONLY
BOLT (E)
SLIDE TUBE STOPPER (F)
BOLT (A)
Qty: 4
SPRING WASHER (B)
Qty: 4
WASHER (C)
Qty: 4
SLIDE TUBE STOPPER (F)
Qty: 1
BOLT (E)
Qty: 1
HARDWARE BAG FOR STEP 3 CONTENTS :
A) Open HARDWARE BAG FOR STEP 3.
B) Attach SLIDE TUBE STOPPER (F) to the SEAT SLIDE TUBE using 1 BOLT (E).
C) Slide the SEAT SUPPORT TUBE through the BASE FRAME.
(920B ONLY) Connect wires from MAST into BASE FRAME and connect to back of SEAT SUPPORT TUBE.
DO NOT PINCH WIRES.
D) Attach the BASE FRAME to the MAIN FRAME using 4 BOLTS (A),4 SPRING WASHERS (B) and
4 WASHERS (C).