Filter
Top Products
BEFORE
YOU BEGIN
26
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
BIKE
OPERATION
LIMITED
WARRANTY
CONDITIONING
GUIDELINES
ASSEMBLY
TROUBLESHOOTING
& MAINTENANCE
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our bikes so lubrication is not needed. The most important maintenance
step is to simply wipe your perspiration off the trainer after each use.
HOW DO I CLEAN MY BIKE?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness of your bike and its operating environment will keep maintenance problems and service
calls to a minimum. For this reason, Tempo Fitness recommends that the following preventive
maintenance schedule be followed.
AFTER EACH USE (DAILY)
Turn off the bike by unplugging the power cord from the wall outlet
• Wipe down the bike with a damp cloth. Never use solvents, as they can cause damage to the
bike.
• Inspect the power cord. If the power cord is damaged, contact Tempo Fitness.
• Make sure the power cord is not underneath the bike or in any other area where it can become
pinched or cut.
To remove power from the bike, the power cord must be disconnected from the
wall outlet.
WEEKLY
Clean underneath the bike, following these steps:
• Turn off the bike
• Move the bike to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
bike.
• Return the bike to its previous position.
EVERY MONTH
• Inspect all assembly bolts and pedals on the machine for proper tightness.
• Clean any debris off of the pedal arm wheels and guide rails.
M A I N T E N A N C E