Filter
Top Products
5.8. Wireless transmission
The D9 can be used together with an optional wireless cylinder pressure transmitter
that easily attachesto thehigh-pressure portof theregulator. By usingthe transmitter,
you can benefit from receiving cylinder pressure and remaining air time data direct to
your wrist.
In order to use the transmitter, the wireless integration needs to be enabled in your
Suunto D9’s settings. To enable or disable the wireless integration refer to
Section 5.9.8. Tank pressure.
5.8.1. Installing the wireless transmitter
When purchasing the Suunto D9, we strongly recommendthat you have your Suunto
representative attach the transmitter to the first stage of your regulator.
However, if you decide to attach it yourself, follow the steps outlined below:
1.
Remove the highpressure (HP) portplug onthe firststage ofyour regulatorusing
an appropriate tool.
2.
Thread the high pressure transmitter of the Suunto D9 into the HP port of your
regulator withyour fingers.DO NOTOVERTIGHTEN! Maximum torque6 Nm/4.4
lbsft or 53 lbsin.The seal is based on a static O-ring, not force!
3.
Attach the regulator to the scuba cylinder and slowly open the valve. Check for
leaks by submergingthe regulatorfirst stagein water. If leaksare detected, check
the condition of the O-ring and sealing surfaces.
41