Filter
Top Products
STAR
TRAC
S
SERIES
TREADMILLS
O
WNER
’
S
M
ANUAL
7
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown, ground provides a path of least
resistance for electrical current to reduce the risk of electrical shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product. If the product must be reconnected for use on a
different type of electric circuit, the reconnection should be made by qualified service personnel in order to avoid
a hazard.
For models 9-3561-MUSAP0
This product is rated more than 15 amperes and is for a circuit having a nominal rating of 120-
volt and is factory-equipped with a specific electric cord and plug to permit connection to a
proper electrical circuit. Make sure that the product is connected to an outlet having the same
configuration as the plug. No adapter should be used with this product. If the product must be
reconnected for use on a different type of electric circuit, the reconnection shall be made by
qualified personnel.
For models 9-3543-MUSAP3; 9-3553-MUSAP3, AND 9-2543-MCOSP3
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated
in sketch A in the following figure. Make sure that the product is connected to an outlet having the same
configuration as the plug. If a grounding adapter is needed, the work should be made by qualified service
personnel. Sketch B shows a sample of an acceptable grounding method.