Filter
Top Products
22
STAR
TRAC
S
SERIES
TREADMILLS
O
WNER
’
S
M
ANUAL
6. Final Assembly
Check the security of all hardware installed during assembly, and
tighten as necessary.
If necessary, level the treadmill using the two adjustable feet under the
tailroller (at the rear of the base assembly). Loosen the locknuts, rotate
the feet until the treadmill is stabilized, then retighten the locknuts.
You have now completed assembly of your STAR TRAC S SERIES
TREADMILL.
ATTENTION
• Star Trac recommends that treadmills be spaced a minimum of 20 inches (0.5 m) apart to
allow safe and easy ingress and egress. More importantly, there must be at least 48 inches
(1.5 m) of free space behind the treadmills.
• As with other motorized equipment, the area where the treadmill is located must be free of
obstacles and fixtures with sharp edges to prevent injury in the event that a user trips or
loses balance and falls.
• DO NOT place treadmill near wet areas (such as pools, showers etc.).