Star Trac P-TBT Exercise Bike User Manual


 
18 STAR TRAC TOTAL BODY TRAINER OWNERS MANUAL
4. For P-tbtx models only: If desired, you can use the SelectFit™ feature during the program (see “Using SelectFit™” for details).
5. You can scroll through workout data during the program (see “Viewing Workout Data During a Program” for details).
6. If you wish to pause the program, stop striding. The TOTAL BODY TRAINER will enter pause mode and display your workout results
for one entire cycle.
7. When you have reached your workout goal, the TOTAL BODY TRAINER enters the Cooldown cycle (see “Cooldown Cycle” for
details). If you wish to exit the program before you have reached your workout goal, stop striding and allow the Pause timer to
expire. If you wish to skip the Cooldown cycle, press the key to view your workout summary.
PRESET PROGRAMS
The
STAR TRAC TOTAL BODY TRAINER
offer 8 preset programs to add variety and challenge to your workout, including the advanced
TRAINING TOOLS function that provides four cardio-intensive training programs.
Pre-set programs include:
Allows the user to pre-program a time goal and user weight. Resistance is determined by the user during the program.
Three difficulty levels that allow the user to pre-program time goal, user weight and difficulty level which then adjusts resist-
ance and upper body position with SelectFit™. For Pro models, only resistance will vary.
NOTE: SelectFit™ is available on the P-tbtx model only.
Allows the user to positively increase the level of resistance by increasing sstriding speed (spm’s). No keys to press with
this one!
200 varied hill programs that allow the user to pre-program a time goal, user weight and program level (from 1 to 20).
An intense 3-peak hike that allows the user to pre-program a time goal, user weight and program level (from 1 to 20).
Our advanced program that offers the user the ability to train in specific HR zones or watt ranges.
NOTE: When entering setup data for any program, if the key is not pressed, the system will “auto-advance” through
the prompts.
MANUAL PROGRAM
The MANUAL program allows the user to pre-program a time goal and user weight. Resistance is determined by the user during the program.
To operate the M
ANUAL program:
1. Access the TOTAL BODY TRAINER, begin striding, and press the key.
2. You are prompted to enter your weight. The TOTAL BODY TRAINER displays a default weight as set in Maintenance Mode. You
may enter any weight from 50 to 350 pounds (22 to 159 kg).
Use the keys to enter your current weight; or press the or key, as necessary, to increase or decrease the dis-
played weight in 1 pound (or 1 kg) increments.
When your correct weight has been entered, press the key to accept the displayed value.
3. You are prompted to enter a time goal.
The default time is 20 minutes, or equal to the time parameter set in Maintenance Mode if less than 20 minutes. You may enter
any time from 10 to 99 minutes.
Use the keys to enter your desired time goal; or press the or key, as necessary, to increase or decrease the
displayed value in 1 minute increments.
When your desired goal has been entered, press the key to accept the displayed value.
4. You are prompted to enter a difficulty L
EVEL.
Use the keys to enter a difficulty level (from 1 to 20) or press the or key, as desired, to increase or decrease
the difficulty L
EVEL in 1 unit increments.
When the desired difficulty LEVEL has been entered, press the key to accept the displayed LEVEL.
TOTAL BODY